There has been a lot of interest in the new Sig Sauer P250 pistol. One of the only problems with this pistol is that there are few holsters available for it. While this will change in the coming months and years, what’s a person to do if they have 
already bought a P250 and need to carry it today?
There are a few options available to the Sig P250 owner. First, is the purchase and use of a “generic” holster. This includes fanny packs and non-specific nylon holsters like some of those made by Uncle Mikes. For a lot of people, these may not be good choices.
In polymer holsters, there are two choices available: the Blackhawk CQC Serpa Holster and the Sig Sauer branded “Serpa-like” holster. Both holsters are strong-side hip carry, outside the waistband holsters. Both holsters are open top with a retention button on the side of the holster where the trigger finger naturally lands when the shooter obtains his or her grip to draw. The Blackhawk comes in matte black or carbon fiber finishes ($48.99 and $58.99 respectively.) The Sig holster comes in matte black and retails for $44.95.
In leather, I have only found one company that is making holsters for the Sig P250: Kramer Handgun Leather. Kramer Handgun Leather has been producing finely made holsters for law enforcement and armed citizens since the early ’80s. Kramer recently obtained the castings needed for the P250 to begin producing their holsters for the new Sig.
In an e-mail, Will Kramer said that most of the Kramer line of holsters are available for the Sig P250. The obvious exceptions are the rigs designed for small guns such as the pocket and ankle holsters. This means you have a wide range of holsters now available including inside the waistband and traditional leather scabbards. Prices depend on the model holster and if any special detail work is requested. The quality is high, so the prices are very fair.
Another option is one of the fine holsters from CrossBreed Holsters. CrossBreed Holsters, among other things, makes several different inside the waistband holsters (IWB) that blend polymer and leather to create a very secure, yet comfortable, holster.
Mark Craighead, the owner of CrossBreed Holsters, said that they are able to produce holsters for the Sig P250 pistol immediately. Prices range from $52.50 to $65.50, and delivery is normally in about 2-3 weeks.
Other articles that will amaze you:
I just recieved the Fobus SP11RH(roto holster) and it fits my 9mm P250 perfectly. Another that will fit is the Fobus SP11B. Only difference is the SP11RH has adjustable cant.
My wife and I both have Sig P250s for CC. I worked with a gun leather / holster store and found that the Galco F719WC after a little breaking in works perfectly. The holster has another number on it CON400B perhaps a serial number.
I’m trying to find a holster for the P250 that can accomodate the Sig ST900L light and laser rail mounted attachment….Any idea who makes a holster for that ?
Thanks
Rudy
Rudy,
What kind of holster? Concealment or duty?
“I’m trying to find a holster for the P250[c] that can accomodate the Sig ST900L light and laser rail mounted attachment….Any idea who makes a holster for that ?”
In regards to the above comment by Rudy, I’m looking for a concelment holster.
Thanks,
Tom
I wonder if Raven Concealment could custom make a holster for the gun/light combo.
Blackhawk (serpa) dose not make a holster for the p250, the package and catolog says it dose but I ordered in now they are saying it is an error, and the don’t want to refund it they want to push it off on the store
Unfortunately holster options are poor as of right now. Sig had stated that Blackhawk’s serpa holster would fit but it doesn’t. I spoke with Blackhawk in April and they told me that they do not have a holster that will fit but that they are in the process of making their full line to fit the P250. Blackhawk stated the holsters would be available in August sometime. Safariland shows they have some holsters for it. Sig Sauer is still telling customers that Balckhawk has a holster but they do not. As for any light bearing holsters, I have not come across any compnay making one for the P250.
I have a p250 compact .40 and cc inside the pant,the holster is a blackhawk, nylon size5. It does not label the p250 however it does fit very nice. As far as with the light, this will not work.
Does anyone know what holsters are available for the Sig P250 for left handed shooters? I am interested in one for range target shooting and would prefer polymer or leather. Thanks!
for duty use of a sig p250 full size or compact is the uncle mike level 2 and three it come in the finishes.
as for concelaled carry uncle mike has several nylon holsters that will work, i have the p250 45acp and the p250 compact 9mm and uncle mikes holster work fine.
I was just at a show yesterday – a vendor there handed me a P228/P229 holster along with a P250 – the fit was nice…
I have a sig p250 and a Blackhawk CQC Serpa that was labeled as 228/229/250. I purchased it off of an ebay store about a year ago so you talked to the wrong person at blackhawk. Also, Galco 250 series holsters that were originally for the 229 that have no thumb break will fit. Their website has a fit for them.
Does anyone know if i can find any left handed holsters for my p250 (.40)??? please email me at stingyou1@aol.com thanks!!
I have a P229R equinox that Blackhawk do a serpa 3 holster for and it fits like a glove . However I cannot find a holster that will allow me to use my viridian green laser led combo any ideas guys ? I was told the Fobus GLT17 would do but the company says no way ?
looking for a right-handed duty holster level II, for my SIG P250 full size .40, for work. any ideas??? i have googled it and everything. every website doesn’t show one for the P250 full .40
Uncle Mikes sells a holster that fits up to 4″ barrels. I just got the P250 for Duty and the holster fits it well. Not the greatest but it works ok.
blackhawk serpa 2022 for the sig pro series works for the p250 i’m using it as a duty holster for the time being.
Okay…so I see a lot of good info here. I am after a P250 Compact Holster that will accommodate a SureFire X300. This is for duty carry. Basically, I lean towards Safariland, but they are making nothing. Reading above, it seems that the 228/229 holsters might be an option for the P250, and they do make holster that will fit a 228/229 with an X300 attached. Can anyone confirm that this would be an option?
Raven Concealment makes a holster for the sig 250 with light
Galco makes a L919WCD snap belt holster for a P250. It’s availabe on the NRA web site store. Out of the box it is stiff and tight, which is not good for a snap holster or if you want to draw the pistol with one hand. Rub in a light layer of neatsfoot oil, then soak the holster in warm water for 15 minutes. Dry it well with a towel. Now your P250 will fit pretty well and draw easily. Work the pistol in an out many times, then allow the holster to air dry with the P250 in place. After drying, rub in another thin film of neatsfoot oil.
Looking for a left side holster for a P250 Compact Sig Sauer 40S&W. Any recommendations? Thanks.
Hello Guys,I have a sig p25o compact Im looking for a hoster that may work with a micro laser?If not any I dea if they are making guide rod lasers for them? Thanks guys!
Hey everyone, I just purchased a sig p250 and I need a stage two security for my holster because of my department. Would the polymer holsters work for this?
Hi Conner,
I’d strongly recommend the BLACKHAWK! Serpa duty holster (not the concealed carry version) for duty use. Our department has gone to them, plus I have trained with the guys at BLACKHAWK! on their use. It is a good quality holster.
If you have not already, check out BlueSheepdog.com, a police training site, for more officer safety and training information.
Good luck and stay safe!
Richard
i need a left handed holster for a sig sauer p250 compact. id like a paddle holster but have been unable to find one. if anyone knows where i can get one please let me know.
Hello Jeremy,
I have a p250 compact 9mm as well and I cannot find a good left handed holster. Were you able to find one since your post? Luke
I have a P250 Full Size with a laser/light combo attachment on the accessory rail and I have yet to find a holster that fits. I’m looking for both duty and concealment (right handed) options so if anyone has any suggestions/options I’d be happy to hear them!
– thank you in advance for the assistance.