With the promise of increasing your loading rate by at least 50% on most progressive presses, RCBS has introduced a new electric bullet feeder.
The feeder fits most progressive presses that use 7/8″-14 threaded dies, including the RCBS Pro 2000.
Designed to work with jacketed pistol bullets only (no lead), the feeder ships with adapter plates for the most common handgun rounds: .355-357″ (9mm, .38 Special, .357 Magnum), .400″ (10mm and .40 S&W) and .451 (.45 ACP). The feeder holds about 200 bullets in the hopper. Â According to RCBS, you should not use this feeder with cast or swaged lead bullets. Â While technically not jacketed, I imagine plated bullets like those from Berry’s are probably good to go.
The feeder runs on 110v AC, and features a two-year warranty. MSRP is $495.95.
The shipping version of the bullet feeder comes with a country adaptable plug to handle 120 – 240v AC. Â This means non-US residents can also use this with their reloading press.
The RCBS bullet feeder kit for progressive reloading presses now carries a MSRP of $541.95. Â Compare that to the MSRP of the Hornady Lock-n-Load bullet feeder which is $363.52. Â Like the RCBS bullet feeder, the Hornady feeder is designed to work with any press using 7/8″-14 threads. Â while I like RCBS products, I don’t know what their bullet feeder is offering for your extra $200.
The Nyclad line of ammunition was developed several decades ago and became popular as one of Federal’s self-defense lines of cartridges.Â The .38 Special self-defense load was a 125 grain, standard pressure round that featured a soft-lead bullet with a very deep hollow point.Â The bullet was coated in a jacket of polymer, similar to nylon, that allowed the bullet to reliably expand all even low velocities.
Many experts feel the 125 grain Nyclad hollow point was the best standard pressure cartridge loaded for the .38 Special.Â It offered excellent expansion with a relatively light recoil in even the lightest of revolver frames.Â My own informal testing seemed good out of a model 642 Smith and Wesson (1 7/8″ barrel), and Evan Marshall’s research tended to show good results in the street.
Until Federal confirms or denies this information, it is merely a juicy rumor at this point.Â I have seen a lot of people snap up the remaining old-stock of Nyclad whenever it has shown up at AmmoMan and other places.Â I suspect it will sell very well if re-introduced.
Update: Federal did re-introduce the Nyclad. Â Scroll down for additional information from the SHOT Show.
The re-introduced Nyclad is a .38 Special load that uses a 125 grain hollow point bullet. Â The load is rated at 830 fps, which is in line with the original Nyclad load. Â Federal designed this load for reliable expansion at low velocity. Â While it would not be my first choice for personal protection, it is a great choice for anyone who carries a .38 and needs a low recoil load due to injury or infirmity.
Check out this video showing how well this load performs in gel through the denim test.
Report from the SHOT Show
Federal Premium AmmunitionÂ re-introduced the Nyclad in .38 Special at the 2009 SHOT Show.Â Available only in .38 Special, the Nyclad round is a standard-pressure, self-defense load with a nylon clad 125 grain soft lead hollow point.Â The nylon coating allows the bullet to reliably expand at low velocities, unlike traditional copper jacketed hollow points which normally require faster velocities in the .355-.357 bullet size range.
The .38 Special loading pushes the 125 grain hollow point at 830 fps for a muzzle energy of 191 ft-lbs.Â While this may not seem like a real “manstopper,” keep in mind that the Nyclad proved to be excellent in its class.Â For a firearm not designed to handle +P pressures, or for someone that is especially recoil sensitive (such as someone who is arthritic), this is a mild recoiling cartridge that will reliably expand.
The Nyclad line of ammunition was developed several decades ago and made its way into one of Federal’s self defense lines of cartridges.Â The original .38 Special self defense load was a 125 grain, standard pressure round that featured a soft-lead bullet with a very deep hollow point.Â It appears that the new Nyclad ammunition will be a close copy of the original.
Many experts feel the 125 grain Nyclad hollow point was the best standard pressure cartridge loaded for the .38 Special.Â It offered excellent expansion with a relatively light recoil in even the lightest of revolver frames.