Categories
Reloading

RCBS Rotary Case Media Separator Review

rcbs media separatorLike a lot of shooters, I reload my own ammunition. Cleaning the brass before running through the sizing and seating processes is always a good idea. I’ve tried washing the cartridge cases with various cleaning products, but have always come back to tumbling with walnut and corn cob media.

Separating the cases from the media has always been a bit of a chore for me. Not terribly difficult, but not very easy either. I have tried different sifters and separators, but never found one I really liked. That all changed when I bought the RCBS Rotary Case Media Separator.

This media separator is simple and it works! Two large halves form a clamshell-like case that catches the media in the bottom half, while the top half closes to trap the dust and significantly reduce noise. Inside the case is the separating device: another, smaller clamshell-like case with sifting holes and rotating handles.

The system is easy. Open the outer case and the inner separator. Pour the media and brass out of the tumbler into the separator. Close the separator and outer case. Turn the handle a few times and you are done. All of the media has dropped into the lower part of the case, leaving you with just shiny brass in the separator.

In my experience, the separator holds about 500 .38 Special cases and media. More than enough for most of the tumblers on the market.

Cleaning the RCBS Media Separator is easy: just wipe it down or hose it off. It is all heavy-duty plastic, so there are no parts to rust.

I was pleased with the ease in which the whole system works. I was also very impressed by the reduced noise from this device as compared to other media separators.

Click here to get your RCBS case separator today from Amazon.