Unlike the C2 model intended for self-defense, the new Pulse has the shape and general functioning of a compact handgun. There is a grip, trigger and mechanical sights like one would expect in a Glock or Smith & Wesson. However, instead of a deadly force projectile, the Pulse uses a pair of barbs as projectiles.
American Technologies Network (ATN) announced additions to the Smart HD line with the introduction of two new rifle scopes: the ATN X-Sight II 3-14x and the ATN X-Sight II 5-20x. The new day/night scopes offer updated electronics and capabilities when compared to the original X-Sight scopes.
These scopes are electronic rifle scopes, not pure glass optics. The scope displays an electronic image to the shooter instead of the shooter looking directly through the glass at the target. This is akin to the difference between taking shots with a modern mirrorless camera as opposed to a traditional SLR. Among the many features of this kind of scope, a shooter is able to electronically make adjustments to the point of aim instead of clicking knobs.
For the 2016 SHOT Show, Savage Arms pulled the cover off of its new .22 Magnum rifle called the A22.
Based on the company’s ingenious A17 rifle that was introduced at the 2015 SHOT Show, the new A22 is chambered for the .22 WMR rimfire cartridge. The company is using the same delayed blowback operation developed for the A17 rifle in this gun to ensure safe, reliable operation.
The new A22 Magnum will have a 21″ barrel and black synthetic stock. The barrel and receiver have a blued finish.
The guns use a detachable rotary magazine that hold 10 rounds. For Savage fans – yes, the guns have the company’s AccuTrigger as a standard part.
The suggested retail price on these new guns is $473.
Long Rifle Version?
What is interesting is what was not said in the Savage Arms announcement. There was no mention of the .22 LR in the announcement, which is a bit curious. The company now has a new model semi-automatic rifle for two of the hottest running rimfires – the .22 WMR and .17 HMR – but no announcement about an updated offering for the extremely popular .22 LR round.
A check of distributor catalogs, however, suggested there may be a version of the A22 chambered for the .22 LR after all.
According to the information I was given, the .22 LR version of the A22 will be very similar to the .22 Mag gun. It will have a 22″ barrel (instead of 21″) and 10-round rotary magazine. This rifle will also have a black synthetic stock and a blued finish.
The .22 LR gun would be less expensive at only $281. I would guess that the cost savings are realized in a less expensive action. Instead of the fancier delayed blowback needed on the higher pressure rounds, the .22 LR would likely have a straight blow back design.
New Logo
One other thing of note: Savage Arms appeared to have changed the company’s logo. Previously, the company has used a logo that depicted a Native American with a headdress:
The new logo is something less distinctive, but more modern:
Korth announced a new 9mm conversion kit to transform a Smith & Wesson L-frame revolver chambered in .357 Magnum. The conversion allows for the use of 9mm “rimless” cartridges in the revolver without needing a moon clip.
The conversion kit comes with the cylinder assembly and speed loader. To convert the gun, all one has to do is remove the lock screw that holds the cylinder assembly in the gun. Then slide out the old cylinder and replace it with the new. Tighten the screw down and that’s it: you now have a 9mm revolver.
The key to efficiently operating a revolver with rimless cartridges is the extraction of the fired shells. When a round is fired, the case expands and creates a tight fit inside the charge hole. The extractor star on a normal revolver pulls the empty case out and allows it to drop free. With a rimless cartridge such as the 9mm, there is no overhanging rim for the typical extractor to use to yank the spent case from the chamber.
Another problem with the 9mm is that the case is tapered. This means that an unfired round has relatively little contact with the inside of the chamber and can back out during fire. A round that backs out of the cylinder can lock up a revolver. This will prevent the gun from firing until the “jam” is cleared.
Typically, the use of a thin piece of metal – a moon clip – would be used to overcome these problems. A moon clip requires the shooter to snap cartridges into it. Then all of the cartridges are inserted and extracted en masse. This system works well for many shooters, and I found it worked well with the Taurus 905 9mm revolver I previously reviewed. Revolver master Jerry Miculek has used these kinds of guns to win competitions and set world records.
However, a number of companies have tried – with varying success – to create revolvers that will run rimless cartridges without a moon clip. A number of decades ago Smith & Wesson did it with the model 547 built on a K-frame.
In more modern times, Charter Arms has made the Pitbull. The Pitbull is a series of revolvers that are chambered for the 9mm, .40 S&W and .45 ACP. While my experience with the guns have been mixed, some people like them a lot. My main issue with the Pitbull was reliable extraction.
Korth has not listed a MSRP on the conversion kits. If the kits are reliable and reasonably priced, I could see the company selling quite a few of them.
It is true that the 9mm doesn’t offer a lot that the .357 Magnum won’t do, but there are some self defense cartridges that simply are not made in the Magnum caliber. Also there are a number of odd people like me that just like doing weird things – like shooting 9mm from a revolver.
IWI US announced the company will show its brand new TAVOR SAR chambered in 300 BLK at the 2016 SHOT Show. According to Michael Kassnar, the VP of Sales and Marketing for IWI US, the company has received “a ton of requests” for a TAVOR chambered in 300 BLK.
The new TAVOR rifles will be available with either a 16.5″ or 18″ barrel. The barrels are cold hammer forged from chrome-moly steel. The barrels are chrome lined. Like the original TAVOR in 5.56 NATO, these bullpup rifles use a long stroke piston system.
One of the issues I have run into with some 300 BLK guns is making them run reliably with both super- and subsonic ammunition. The new rifle has a built in gas regulator to allow the shooter to tune the gun for normal or subsonic ammunition.
Since the 300 BLK fits into the same deisgn envelope as the original TAVOR and uses the same magazines as the 5.56 NATO, virtually all existing accessories should work with the new guns. Anything dependent on bullet diameter – such as a muzzle device – are not interchangeable. So, don’t throw a .223 caliber sound suppressor on this gun and expect it to work more than once.
The suggested retail price on the complete rifle is $2,049.
Conversion Kits
In addition to selling a rifle chambered for the .30 caliber cartridge, the company also announced it would sell conversion kits for existing TAVOR rifles. So, if you already own a 5.56 or 9mm TAVOR, you only need buy the conversion kit to run the 300 BLK.
The conversion kits will come with your choice of a 16.5″ or 18″ barrel made of chrome-moly steel, a headspaced bolt and barrel wrench. The barrels are cold hammer forged with a 1:7″ twist and are topped with an A2-style flash hider. The suggested retail price on the conversion kit is $499.
We will try to get more information for you on the TAVOR from the SHOT Show. I’m also looking forward to seeing another bullpup at the show: the Desert Tech MDR.
