Categories
news

Taurus 856: Return of a Classic Revolver

Taurus 856 featured image

[Editor’s note: Taurus announced the new Defender 856 at the 2020 SHOT Show. The new guns are +P rated with a 3″ barrel and a front night sight.]

Taurus USA announced the return of the Model 856 revolver.

Table Of Contents
  1. Just the Facts
  2. Six Shots or Only Five?
  3. Bull vs. Snake
  4. Final Thoughts

While the gun is interesting on its own, I find that it is an even more compelling introduction when it is put head-to-head with the Colt Cobra. But, I’m getting ahead of myself. Let’s first take a look at what the gun is.

Just the Facts

At its most basic, the Taurus 856 is a 6-shot, compact revolver with a steel frame. It comes in at less than 1.5 pounds unloaded and is chambered for the venerable .38 Special cartridge.

Taurus 856 revolver

The gun has sights typical to concealed carry revolvers of this size: a fixed front ramp with a trench-style rear that is integral to the frame and top strap.

Taurus uses a set of its own rubber stocks on the gun. I’ve not had a chance to shoot a gun with these grips yet, but they look to be an improvement over some of the grips the company used in the past. The profile looks similar to Pachmayr Compac grips I’ve used occasionally on my Smith & Wesson J-frames.

(Update: Taurus will introduce new frame colors for the 856 at the 2019 SHOT Show.)

Six Shots or Only Five?

When Dirty Harry asked that question, he was talking about the rounds in his 6-shot .44 Magnum. But a lot of cops were asking themselves the same question when that movie was released. Should their backup gun hold six shots, or only five?

While many compact wheel guns use a 5-shot cylinder to decrease the gun’s width, there are a lot of people who are hesitant to give up that extra round of ammunition in their defensive handgun.

Guns like the Colt Cobra battled the 5-shot J-frames from Smith & Wesson for position in the ankle holsters of cops in the 60s and 70s. That single extra round of ammo made the decision easy for a lot of lawmen. A little extra width and weight were a cheap price for 20% more firepower.

With the renewed interest in the compact revolver, companies have expanded their wheelgun offerings in recent years. This includes Colt, that rolled out its updated Cobra in 2017.

Bull vs. Snake

The new Taurus 856 is a direct competitor to the new Cobra. Both are compact, steel-frame revolvers with 6-shot cylinders.

There are differences, of course. Here’s a look at some of their specs:

Taurus 856Colt Cobra
Caliber.38 Special.38 Special
Capacity66
ActionDA/SADA/SA
Barrel Length2″2″
Overall Length6.55″7.2″
Unloaded Weight22.1 oz25.0 oz
Frame Materialcarbon steel or stainless steelstainless steel
Height4.8″4.9″
Width1.41″1.40″
Sightsserrated front ramp, fixed trench rearfiber optic front, fixed trench rear
GripTaurus branded rubberHogue Overmolded
Finishmatte blue or matte stainlessmatte finish
MSRP$329$699

While I would prefer the Colt’s fiber optic sight to the Taurus’s serrated ramp, the specs seem to heavily favor the Model 856 when you factor in the final comparison: the price.

The Colt Cobra is more than twice the price of the Taurus 856.

I would never buy a self-defense handgun on price alone. However, the huge price difference is likely to sway many people standing at a gun counter.

For me, the key differences are the ones not listed in the spec chart above. What kind of reliability can I expect out of each gun? How smooth is the trigger? Does the gun feel good in my hand?

Those are things that I can only determine through testing of the guns.

Final Thoughts

Taurus USA and its parent company have been through some rough years. I don’t know if the bad times are truly behind them, but I do like the guns I’ve seen announced at the SHOT Show this year. The guns expand on the company’s best lines and are interesting enough to bring in new buyers.

Taurus 856 Custom
Since this article was written, Taurus introduced multiple versions of the 856 revolver including this model with special VZ Grips.

The Model 856 seems to be introduced with the same reasoning. It is a known winner and is competing in a popular niche with relatively little direct competition: compact, 6-shot revolvers. With such an inexpensive MSRP, I suspect these guns will be good sellers.

If Taurus quality control can keep these guns in the hands of its customers and out of the repair center, I think this gun can go a long way in restoring trust to the Taurus brand.

Last Update: October 17, 2022

Categories
news

Taurus 692 Multi-Caliber Revolver: .38, .357 and 9mm

Taurus 692 revolver
Taurus 692

Rumors of a multi-caliber revolver being introduced at the SHOT Show are true. Say hello to the Taurus 692.

The Model 692 is a revolver that is chambered in .357 Magnum. As most shooters know, you can shoot .38 Special loads from a .357 Magnum wheelgun. The twist, however, is that you can also shoot common 9mm rounds through this gun with the use of a conversion cylinder.

Taurus already offers a 9mm revolver, though it cannot shoot other cartridges from the gun. (Read more on the Taurus 905.) The 692 is designed to give your greater cartridge flexibility with a single gun purchase.

Swapping a revolver’s cylinder is easy and takes just a minute with a screwdriver. One of the things I like about the cylinders on this gun is that they are unfluted. Generally, I like a fluted cylinder, but the unfluted version looks good on this gun.

Taurus 692 revolver

Taurus offers the 692 in two different barrel lengths: a 3″ model for concealed carry and a longer 6.5″ model for target shooting and fun at the range. Interestingly, Taurus elected to port the barrels on this model. The porting should help reduce muzzle rise and felt recoil, though it is possible this could increase the visible flash in low light.

Both versions of the revolver are available in either a matte black or matte stainless finish.

Although many people still refer to revolvers as six shooters, the Taurus 692 is not. It is a seven shooter. In both the 9mm and the .38/.357 cylinders, you have seven rounds. For the 9mm shooter, Taurus includes its stellar clips so the rounds are easily loaded and the empty cases can be extracted without any problems.

Taurus model 692

Up front, Taurus uses a pinned ramp sight. An adjustable rear sight is standard.

The Taurus 692 is a double-action gun that can be cocked for single-action shooting. The spurred hammer is fully exposed.

The suggested retail price on this gun is $659. Your dealer sets the final price, so I imagine you could get out the door with a Model 692 for less than $600.

Caliber.38 Special, .357 Magnum, 9mm
Capacity7 rounds
ActionDA/SA
Barrel Length3″, 6.5″
Weight35 oz (3″), 46 oz (6.5″)
Sightspinned ramp front, adjustable rear
GripTaurus rubber grip
Finishmatte black or matte stainless
MSRP (at launch)$659

Update from the SHOT Show

Taurus 692 at SHOT Show

The 692 was on display at the 2018 SHOT Show. The gun was pretty much as described, porting and all. The one thing I didn’t like was the huger “TRACKER” logo down the left side of the barrel assembly. Otherwise, the gun looked good. Early indications show a lot of interest in this revolver, so I am expecting to see Taurus sell a good number of them.

Update

Yes, the Model 692 made it into production and can be purchased now. I know that the company has failed to deliver some announced guns in the past (28 gauge Judge cough, cough,) but this one is real.

Last Update: October 17, 2022

Categories
80% Builds

SS80: 80% Glock 43 Compatible Frame

SS80 Glock 43 frame featured image

Magill’s GlockStore announced the introduction of a new 80% Glock compatible pistol frame: the SS80. This is a subcompact frame that allows you to build a Glock 43 style pistol at home.

Table Of Contents
  1. What It Is
  2. What It Is Not
  3. Building Your Own – Parts & Tools
  4. Building Your Own – Legal Issues
  5. Final Thoughts

The SS80 is the first G43 compatible 80% frame on the market. It is also one of just a few Glock compatible 80% frames available.

SS80 Glock 43 frame complete gun shooting

What It Is

GlockStore’s SS80 is a glass filled polymer frame that is commonly referred to as an 80% frame or 80% lower. An 80% frame is an unfinished frame that requires finishing work done before it can be a functioning firearm.

SS80 Glock 43 frame

In the case of the SS80, you will need to remove portions of the polymer frame using a file or Dremel tool and then make four holes with a drill. Once this is done, it can be considered a firearm frame. Until then, it is legally just a hunk of plastic. It can be shipped straight to your door without the need to pay an FFL transfer fee.

The SS80 is not a Glock frame. Rather, it is a frame that is compatible with Glock 43 parts. This means that GlockStore set it up with a different look and feel than the G43. A few of the features of the SS80 frame include:

  • stippling-like grip texture for improved control of the pistol when shooting
  • frame and trigger undercuts in the trigger guard to allow for a higher grasp on the pistol
  • compared to a G43, the SS80 has a longer beavertail
  • metal rails that are longer than factory

When completed, the SS80 frame will accept single stack Glock 43 magazines and other standard parts. It will assemble like a factory G43 pistol.

SS80 Glock 43 frame kit

Included in the SS80 kit is:

  • polymer jig (the bright green “box” the frame goes in)
  • SS80 frame
  • locking block and metal rails (no polymer rails) plus pin for rear rails
  • drill bits needed to finish the frame

The suggested retail price is $150. At the time of this writing, the GlockStore has it on sale for $129.99.

Yes, these are made in the United States of America.

What It Is Not

The new SS80 is designed for G43 parts only. You cannot use it to make a .380 ACP chambered G42 clone.

Additionally, it is not a double stack frame that would allow you to build a G26/27 type pistol. However, Polymer80 is working on one of those and is expected to introduce them at the 2018 SHOT Show. Click this link for more information on the Polymer80 P940SC 80% frame.

Building Your Own – Parts & Tools

GlockStore put together a series of instructional videos that show you exactly how to finish and build the SS80 into a functioning firearm. I’ve followed the company’s other videos on building a Glock clone, and I have found them to be easy to follow. Also, the videos are professionally produced. You get clear sound and detailed images.

Some of the tools that you will need:

  • vise (optional, but makes things easier)
  • hand drill (optionally, you can use a drill press)
  • Dremel tool (optionally, you can use a file or knife but these will be slower)
  • WD40
  • fine grit sandpaper
  • finishing files

Once the lower is completed, you will need some additional tools to install the Glock compatible parts into the frame to build the functioning firearm. A set of punches and light hammer can help with assembly.

Building Your Own – Legal Issues

At the time of this writing, a citizen of the United States can build his or her own firearm for personal use without a license under federal law. This firearm does not need to have a serial number, be registered or be transferred through a federally licensed firearms dealer under federal law. I have no way of knowing what the law will be in the future, so please govern yourselves accordingly.

SS80 Glock 43 frame kit

State laws vary greatly, and you should definitely check with your local and state authorities on the legality of building your own pistol for personal use.

If you intend to build a firearm to sell or give away, you must have a license per federal law. This does not preclude you from building your own firearm and later trading it, selling it or giving it away as long as it was not built with that intention.

For additional information on the legalities of building your own firearm and requirements for serial numbers, check out my article “Am I Required to Apply a Serial Number to a Homemade Firearm.”

Final Thoughts

I’ve had a lot of fun building my own guns in the past. This kit looks like a solid 80% frame kit, and one that I will probably tackle at some point. I own a Glock 43, so I already have plenty of magazines that will run in this gun. It might be an interesting project to compare a completed SS80 vs a factory Glock 43 pistol.

Have you built an 80% gun? If so, sound off in the comments. I’d like to hear what people are building out there.

SS80 80% frame kit

Last update: October 23, 2022

Disclaimer

GlockStore is not an advertiser. I do not have any relationship with them other than having been a customer of theirs. I receive no compensation for writing about this Glock 43 80% frame.

GunsHolstersAndGear.com is a for-profit website. I do not charge readers a dime to access the information I provide.

Some of the links on this page and site are affiliate links to companies like Amazon and Palmetto State Armory. These links take you to the products mentioned in the article. Should you decide to purchase something from one of those companies, I make a small commission.

The links do not change your purchase price. I do not get to see what any individual purchases.

Categories
Ammunition

Winchester Hybrid-X: New Defensive Ammo

Winchester Hybrid-X new ammo

Winchester Ammunition announced a new defensive ammo called the Hybrid-X. The Winchester Hybrid-X ammo merges multiple bullet technologies to provide rapid incapacitation of a violent attacker.

Table Of Contents
  1. The Basics
  2. Quik-Shok: Inspiration from the past?
  3. Range Testing
  4. Final Thoughts

But, is the new design an improved manstopper or just a gimmick? Although the ammo has a long way to go to prove itself, I think the line has some merit. Let’s take a look at what it is, where it may have drawn some inspiration and what it actually does in a testing medium.

The Basics

The new bullet design combines a polymer tip, a copper jacket and a segmenting lead core. As the bullet strikes the target the core is designed to break into smaller projectiles and, according to Winchester, “deliver massive energy transfer.”

Winchester Hybrid-X

Looking at the illustrations of the bullet, it would appear that the polymer tip makes up the majority of the rounded cone on the leading end. The segmenting core appears to have something akin to a wadcutter profile.

Initially, the new ammo will be offered only in 9mm. However, the company is likely to expand the line based on consumer feedback and request. The 9mm load uses a 124 grain bullet and is loaded to +P pressures. At the muzzle, the bullet’s measured velocity is 1,225 fps. Although the design is uncommon, the bullet’s weight and velocity are in line with other conventional loads.

Quik-Shok: Inspiration from the past?

Rounds like the Hybrid-X have been made in the past. For example, legendary defensive bullet designer Tom Burczynski designed a projectile called the Quik-Shok. This bullet technology was licensed by the defunct Triton ammunition company that sold the rounds in a wide variety of calibers.

According to an article written by Burczynski in the book Street Stoppers, the Quik-Shok bullet fragmented into three parts upon impact. Compared to typical fragmenting self-defense loads of the time, the Quik-Shok round delivered deeper penetration (about 10″.) Burczynski wrote he designed the load “primarily for law enforcement use in hostage situations or special situations where extremely rapid incapacitation is paramount.”

Winchester Hybrid-X new ammo

The Winchester Hybrid-X appears to be a different animal, though the concept is appears to be similar to that of the Quik-Shok. It is likely the company engineered this round to penetrate to the arbitrary 12″ minimum depth of the FBI testing protocols. If so, this load may offer a significant alternative to both citizens and law enforcement agencies deciding on what to carry.

Range Testing

Recently, Rob Pincus became the first person outside of Winchester Ammunition to test the Hybrid-X ammo. Pincus is the director of the Personal Defense Network and a firearms trainer.

According to Pincus, the Hybrid-X ammunition “ran flawlessly” in multiple compact and full-size self-defense handguns. Pincus also said that accuracy with the round was “solid.”

Winchester Hybrid-X penteration testing

Pincus shot a number of these new rounds into Clear Ballistics testing medium. Clear Ballistics makes a synthetic alternative to ballistics gelatin that is used for FBI testing. While it is not identical to the “official” testing medium, it does offer an early look at potential performance.

All shots into the Clear Ballistics blocks were made at 12′ and with two layers of cotton clothing over the facing side of the block.

From the photos Pincus provided me, it appears the 9mm load penetrated to about 7-8″ before it broke into its designed shards. These pieces continued to penetrate deeper into the block. It appears in the photo above that two of the pieces penetrated to about 12″ and a third went to about 13″.

Winchester Hybrid-X ammo review

I’m still a fan of the modern bonded hollowpoint,” said Pincus. “Rounds like the Defender round or the from Winchester’s Train & Defend line are my primary choice for self defense. However, the Hybrid-X is an impressive option for a non-traditional approach. The design offers the feeding characteristics of a ball round but with far greater wounding capacity.

Pincus said that a video of his testing will be posted at the Personal Defense Network in the near future.

Last Update: October 23, 2022

Final Thoughts

I’ve always liked the idea of this kind of bullet. None of the segmented bullet designs to date, however, have ever managed to convince me to move away from traditional hollowpoint designs.

The testing information and photos provided by Pincus are suggestive that Winchester Ammunition has a product that offers better performance than older fragmenting bullet designs. Additional testing through barriers and with traditional ballistics gelatin will likely be instructive on how far the company has moved the design forward.

I look forward to seeing testing of this ammunition, and expect Winchester will have demos run at the 2018 SHOT Show.

Note: This article has been updated to include first hand testing information from Rob Pincus. Thanks to Pincus for giving me permission to use his photos in this article.

Categories
Handguns

Good News – Taurus Now Shipping the Spectrum

Taurus Spectrum factory photo

Taurus USA announced on its Facebook page that the company is now shipping the Spectrum pistol. (Update: You can read my Taurus Spectrum review here. At the 2019 SHOT Show, I will try to track down someone at Taurus who will be willing to comment on the problems I’ve experienced with the gun.)

Taurus made the announcement on December 22, narrowly beating an “end of the year” deadline that I was told the company was working toward.

Taurus Spectrum Shipping

The Spectrum was officially announced at the 2017 SHOT Show, though I previously broke the news about the gun last December. The gun was slated for a first quarter release, but was delayed. I spoke with a company representative about the delays and was told that Taurus decided to make some improvements to the pistol prior to shipping. These improvements required additional testing to ensure customers would be happy with the end result.

It was at that time I was told the company was hoping to have them out by year’s end.

It is a .380 ACP pistol that has a number of design elements that may appeal to shooters. This includes a shape based on extensive ergonomic testing and research, the use of soft overmolds and the use of a magazine extension that works with the size of a pinky.

However, the most eye catching feature of these new guns is the wide variety of color options available. When announced the basic colors would cost only $289.

I have been critical of Taurus in the past, but I also judge every gun based on its own merits. I look forward to testing these and hope Taurus has a winner on its hands. Regardless, you will get an honest gun review from me on it.

Update: My local gun shop was able to order me an all black version of the Spectrum. I have it in my safe now, and will be testing it in the coming weeks.