• Skip to main content
  • Skip to primary sidebar

Guns Holsters And Gear

honest reviews and news on firearms

  • Home
  • 2020 SHOT Show
  • Reviews
    • Ammo
    • Books
    • Flashlights
    • Guns
    • Hearing Protection
    • Holsters
    • Knives
    • Survival Gear
  • Resources
  • About
    • Privacy Policy
    • Review Policy
    • Site Index
  • NRA Lifetime Membership

You Asked, They Delivered: The PF940CL 80% Pistol Frame

You Asked, They Delivered: The PF940CL 80% Pistol Frame

by: Richard Johnson 2 Comments

Polymer80 PF940CL

Page Navigation

  • The Basics
  • When Can I Get One?
  • What’s Included?
  • Whoa – Did Someone Say Ghost Gun?
  • My Thoughts
    • Disclosures

Polymer80 announced a new Glock-compatible 80% pistol frame called the PF940CL. This new user-completed frame combines a full-size slide and barrel with the company’s short grip. The result is a gun with a longer sight radius and increased velocity with the improved concealability of a compact handgun.

(Ed. note: The above photo is of the PF940CL and is from Polymer80. The other photos are of me building and shooting a handgun made with a prior generation Polymer80 frame.)

The Basics

The new Polymer80 PF940CL is a non-firearm part that can be finished by the end user to make a functioning handgun. It is fully compatible with “3 pin” Glock parts.

When completed, the gun will safely shoot 9mm, .40 S&W or .357 SIG depending on the slide and barrel assembly you install. Slide assemblies for the G17, G17L, G22, G24, G31, G34 and G35 pistols are all compatible with the frame. This means you can run a long slide on one of these frames if you like.

While the top of the frame is full sized, the grip portion is cut down to the compact length for easier concealment. Since Glock magazines are fully compatible within a pistol series, you simply use a Glock-compatible compact magazine in this gun. For example, you would use a Glock 19 magazine with a Glock 17 slide assembly.

Some people might question the usefulness of this setup. However, a chopped grip with a full length barrel has been popular for decades.

For concealed carry, the extra grip length of the full size pistol increases the likelihood of printing. A shortened grip length reduces this possibility while still allowing you to carry a respectable amount of ammunition: 15 rounds in the 9mm.

When Can I Get One?

Polymer80 says it expects to begin shipping the new 80% frames around the beginning of October, 2018. I expect initial demand to be strong, so finding one at launch may be a bit difficult depending on how many Polymer80 can get into the pipeline. I expect plenty to be available in time for Christmas.

What’s Included?

Unlike some companies, Polymer80 is good at including almost everything you need to complete the receiver and turn it into a working gun.

Polymer80 Glock Frame

In the kit, you will get an 80% frame plus the company’s locking block and rear rail system. Also included are drill bits and an end mill. The drill bits and end mill are needed to make the necessary holes and remove material to make this a legitimate receiver.

Whoa – Did Someone Say Ghost Gun?

Wait…you mean that the Polymer80 PF940CL is one of them ghost guns?

Well, without getting into a detailed explanation of why it is completely legal to build a firearm for your own personal use, yes – this kit will (with your labor, tools and the missing Glock parts like a barrel and slide) allow you to build your own pistol.

Big Notable Caveat: It is completely legal to build your own gun under US federal law. Some states in the US might have their own laws that govern this. Likewise, readers outside of the United States are likely to run into issues.

For more on this topic, I’d suggest reading my article on the legality of building and owning your own gun without serial numbers.

My Thoughts

I’ve built a Polymer80 gun in the past, and I highly recommend that others try it out for themselves. I found the creation process was enjoyable. The final result was quite pleasing.

Unlike the pistol I built, this one is improved with rear metal rails. My pistol was an older design with the rear plastic rails. These required a great degree of hand fitting. The new system on the Polymer80 PF940CL is superior.

Polymer80 Glock pistol

The photo above shows me shooting my personally owned and made Glock compatible pistol that uses an earlier generation Polymer80 frame.

These kinds of kits run about $150, though I’ve occasionally seen them go on sale. By the time you add in the finishing parts, you are not saving much money (if any) on a factory Glock pistol.

However, if you enjoying building things, I found the price is more than worth it. Before it fell off of my fishing boat, it was a great shooting pistol.

Disclosures

Polymer80 is not an advertiser nor have they “sponsored” this article.*

I have no business interest in any firearm manufacturer and accept no advertising from them. In fact, you will not find any pop-ups, pop-unders, auto-playing videos or other annoying foolishness on this site.

GunsHolstersAndGear.com is a for-profit website. I do not charge readers a dime to access the information I provide.

Some of the links on this page and site are affiliate links to companies like Amazon and Palmetto State Armory. These links take you to the products mentioned in the article. Should you decide to purchase something from one of those companies, I make a small commission.

The links do not change your purchase price. I do not get to see what any individual purchases.

*Sponsored articles are often nothing more than a direct payment for a site to publish an article about the product in question. Sometimes the article is even written by the company and not by the website publishing it.

There are quite a few sites that take the money and publish the content without ever disclosing this to their readers. Be careful where you invest your time.

3D Printed Guns, Thermonuclear Weapons & the First Amendment

by: Richard Johnson Leave a Comment

Did you know that it is legal to publish information on how to make a hydrogen bomb? The Progressive magazine did it in 1979 after fending off a government attempt to censor it.

In light of that, it makes the latest brouhaha about printing a single-shot pistol seem silly. After all, what are the digital blueprints to a crude firearm compared to those of a thermonuclear weapon that can level entire cities?

Fundamentally, the question is the same in each case: can the United States government suppress the free exchange of information if it decides the information meets a threshold for being too dangerous? The answer is unequivocally no.

Free Exchange of Information

Communication is a pre-existing right, a natural right, that is protected by the First Amendment of the US Constitution. It is a right that naturally exists and is not granted by any government or political body. In fact, speaking out against the government is considered by many people to be the purest form of protected speech.

Time and again, this right has been recognized by the court system even when the communication is considered dangerous or would be detrimental to the government. This right has been recognized to protect nearly all kinds of communication including advocating for violence at a KKK rally, desecrating the US flag, publication of the “Pentagon Papers” and sharing the secrets of nuclear weapons in The H-Bomb Secret.

I list these specific examples because they can be uncomfortable, offensive and damaging to people and/or the government. But it is only that which we find offensive, frightening or dangerous that needs protection. Speech that everyone agrees with needs no such protection.

Among the rights protected by the First Amendment is the right to speech. Specifically, the Constitution reads:

Congress shall make no law respecting an establishment of religion, or prohibiting the free exercise thereof; or abridging the freedom of speech, or of the press; or the right of the people peaceably to assemble, and to petition the Government for a redress of grievances.

Distilled down:

Congress shall make no law…abridging the freedom of speech…

No law abridging the freedom of speech. None.

Nevertheless, we have allowed the government to restrict various forms of speech from the earliest days of the Republic. Alexander Hamilton, for example, helped to draft and push through the Sedition Act of 1798 that imprisoned people for speaking or publishing anything identified to be against the government or president.

During World War I, the Woodrow Wilson administration jailed hundreds of people who spoke out against the government. And lest you think these kinds of issues are only in our distant past, consider that the Barrack Obama administration prosecuted whistle blowers under the same WWI Espionage Act – more than all prior administrations combined.

However, just because the government has trespassed upon our rights in the past, does not make it right today. Otherwise abhorrent practices of the past such as slavery, segregation, racial concentration camps and mass sterilization could still be legitimate practices today.

More Than Just Speech

As it was understood by the people at the time the US Constitution was adopted, and as it has been recognized by the courts throughout the years since, speech includes other forms of expression including writings, art and video. Dangerous ideologies are also protected.

Here in the United States, printed materials have always been considered protected speech. Publications like the magazine High Times and the various books on revenge, weapon making, creating false identities and hiding from the law have enjoyed broad protections for decades. Web sites, e-mail and other forms of electronic communication are also protected in spite of government encroachment in the digital realms.

Computer code, a recipe if you will, for creating a gun also has the same protection. Information can be dangerous, but the possibility for unlawful use by someone does not usurp the rights of law abiding citizens to read, possess, create and disseminate it.

Where Do You Stand?

I recognize that most of my readers are pro-gun people and are likely to support the ability to publish information on making guns. However, for the First Amendment to truly be strong enough to protect that right, all forms of communication must be defended by all of us – even, and especially, when such speech is uncomfortable.

Are you willing to defend someone’s right to burn a US flag? What about someone’s right to hang an effigy of President Trump? Would you support someone’s right to advocate for a repeal of the Second Amendment?

Standing up for uncomfortable – even crude, ugly and repugnant – communication is difficult. You don’t have to agree with the content, but will you stand for someone’s right to say or publish it? After all, that’s what we are asking people who dislike guns to do here: support our right to publish information about making firearms.

In 1979, I was just a dumb kid building models, playing Dungeons & Dragons and marveling over the relatively new Atari 2600 video game system. Even though I disagree with probably every single political aim The Progressive has, I’d like to think that I would have willingly spoken out for its right to publish The H-Bomb Secret had I been old enough.

Sadly, I don’t expect The Progressive or its readers to do the same for us today. Perhaps I could remind them of what Ron Carbon, the former publisher of The Progressive, wrote in his article “Afterthoughts – March ’81”:

Some of our colleagues in the mass media felt that ours was not a good First Amendment test case, since it involved the emotion-charged issue of nuclear secrecy…But we know there is no such thing as a “good” First Amendment test case: The First Amendment comes under attack only when someone thinks there is an urgent reason for curbing freedom – and it is precisely in those circumstances that the First Amendment must be upheld.

Replace “nuclear secrecy” with “guns” and see if that shoe still fits.

And if you believe they should be supporting us right now, will you show the same consistency the next time your ideological opponents are threatened with an abridgment of their rights?

NRA Life Membership – Best Deal [Limited Time]

by: Richard Johnson 100 Comments

NRA Lifetime Membership Discount

Gun owners need to sign up immediately for a lifetime membership to the NRA.

Why? Let me tell you.

As of January 7, the anti-gun team of Joe Biden and Kamala Harris have officially won the White House. The US Congress is also in anti-gun hands.

The bottom line: more gun control legislation is coming at us. Just ahead of the election, Biden announced this:

Joe Biden announces more gun control.

We have to fight back – hard.

I don’t mean picking up a rifle and head off to war. I mean politically. We have to block all anti-gun legislation locally and in Washington DC. To do that, we need to organize – something the NRA has been doing for decades.

Current Best Price on NRA Memberships

Right now, the best NRA prices are:

  • 1 Year: $30
  • 5 Years: $125
  • Lifetime: $1,000

The $1,000 NRA life membership is the best deal going for anyone that’s going to be in the gun rights fight for the long haul. It gives you voting privileges to steer the NRA into stronger waters.

But, the 1-year deal is also a great option for a fraction of the price.

Organized, we can slow down, modify and stop any and all legislative threats to our freedoms. Disorganized – well, we will have them rammed down our throats.

I think Ben Franklin said it best:

Ben Franklin Hang Together

You have several choices in how to join the NRA. Follow my recruiting link here.

The best deal is on the Lifetime Membership which is currently discounted in an effort to bring as many people into the fight as possible. That will be a $1,000 investment into the fight and gets you full voting rights at the National Rifle Association.

Join or Die Flag NRA

The $600 NRA life membership discount from years past is gone! The current best deal is $1,000 to secure your lifetime membership to the National Rifle Association with full voting rights. Follow my recruiting link here.

Keep in mind, the current NRA membership deal is for a limited time only and can change at any time. Those who have missed prior deals know this to be true.

NRA Life Membership Discount

If you cannot afford a lifetime membership, consider a one-year or five-year membership. While these levels do not earn you voting rights within the National Rifle Association, they still help the fight and provide you with important information about new legislation, a magazine subscription of your choice and a wealth of additional benefits.

NRA Lifetime Membership

If you think gun rights are safe, you would be incorrect. Not only are states like California aggressively attacking your civil rights, but anti-freedom organizations are continuing to push for more legislation at the local and federal levels as well.

NRA Life Discount

New Jersey just passed a slew of new gun control laws, and its governor is pushing for more. Even “safe” states like Florida have pushed new knee-jerk gun control laws.

Did you know that under Florida’s new laws, a 20-year old can’t buy a hunting rifle to deal with feral pigs destroying his farm?

Why do I need a NRA Lifetime Membership?

Like many of you, I don’t agree with the NRA on every point. Yes, I think the organization could use a better direction. But they are fighting many of these draconian laws like the one that prevents adults from owning rifles in Florida.

Plus, as a lifetime member, you get full voting rights. That means you decide who will be on the board of directors. This can help direct the organization down the path that you think it needs to go. I think there need to be some changes, and we need every voting member to make that possible.

Also, if you hope to see the legislation against sound suppressors scaled back, the NRA needs you on the membership roles to help pressure the US Congress to take action.

Can’t Afford a NRA Lifetime Membership? No problem!

Even if you cannot afford to sign up for the lifetime membership, the NRA still offers a discount on annual memberships.

Annual memberships are benefitting from a $10 price drop. An annual membership does not get you voting rights until you’ve been a member for five consecutive years. However, it gets you on the team with the magazine and other benefits until you are in a position to jump up to a lifetime member.

If it sounds like I’m pushing hard for everyone to join the NRA, it’s because I am. I want to improve the organization with fresh blood and encourage it to be more active in defending our rights to firearms and self-defense. We live in bad times and a strong, energetic NRA has never been more important. Please, take advantage of this NRA membership discount and sign up. Even if you can only grab a one year deal, hop on board!

Join today and help chart our course for the future!

Please note: My support of the NRA does not diminish my support of other gun rights organizations. I also recommend that everyone be a paid member of the Second Amendment Foundation and the Firearms Policy Coalition.

GunsHolstersAndGear.com is a for-profit website. I do not charge readers a dime to access the information I provide.

Some of the links on this page and site are affiliate links to companies like Amazon and Palmetto State Armory. The NRA links are affiliate links as I am a recruiter for the organization. These links take you to the products mentioned in the article. Should you decide to purchase something from one of those companies, I make a small commission.

The links do not change your purchase price. I do not get to see what any individual purchases.

Walther PPQ Subcompact

by: Richard Johnson 16 Comments

Walther PPQ SubCompact

Walther Arms announced its latest pistol: the Walther PPQ SubCompact. This new 9mm handgun takes all of the popular features of the PPQ M2 and puts them into a more concealable platform. This announcement was made at the 2018 SHOT Show where the guns were on display at the Industry Day at the Range event.

The Basics

In many ways the Walther PPQ SSC is just a chopped PPQ M2. However, that description diminishes how good this pistol could be. Nevertheless, it shares many of the iconic features of the larger gun just in a smaller package.

The PPQ Sub Compact has a 3.5″ barrel with a 1:10″ twist. This is 0.5″ shorter than the standard PPQ M2. One of the key measurements of a concealable handgun is the grip length. While Walther doesn’t give a measurement for the grip alone, the height of the gun is listed as 4.4″. This is a drop of 0.9″ from the full size pistol.

In more concrete terms, this means that the subcompact version of the gun is not long enough for the pinky to wrap around the grip. With the gun chambered in 9mm, 10 rounds fit into a flush seating magazine.

What is very nice is full compatibility with the larger 15-round and 17-round magazines of the larger PPQ guns. These mags use a spacer sleeve to provide a full grip on the gun. Also, the spacer sleeve prevents the magazine from striking the ejector when inserted into the pistol.

Walther PPQ SC specs

There is no immediate word if a .40 S&W chambered gun will be offered in the future. I doubt that adding the .40 S&W is a priority for Walther Arms since the 9mm is the most popular self-defense cartridge in existence. However, I could see them introducing it as it could be used as a backup gun for law enforcement agencies in a manner similar to how Glock positions the G17/G22 and G26/G27 pistols.

Walther continues the use of a push button style magazine release on this pistol. While I prefer this, I know there are many Walther fans who like the lever style release. While not truly ambidextrous, the button can be moved to the right side of the gun if you prefer.

Keeping with the idea of matching the gun to the shooter, Walther Arms retains the ambidextrous slide stop lever. Additionally, the grip has backstrap panels that are swappable.

Walther PPQ SC left side photo
Walther PPQ SC ambidextrous controls
Walther PPQ SC diagram
Walther PPQ SC backstraps
Walther PPQ SC with extended magazine
Walther PPQ SC right side of gun

Specifications

caliber9mm
capacity10 rounds, 15 rounds in extended magazine
actionQuick Defense trigger
barrel length3.5"
overall length5.4"
weight21.2 ounces unloaded
height4.4"
width1.3"
grippolymer
finishblack
MSRP$649

Price and Shipping

The PPQ SC has a suggested retail price of $649.

Walther Arms states the PPQ Sub Compact is shipping now. You should be able to slide by your local gun shop and order one up today. I would expect demand to be heavy for these initially, so you may have a delay depending on how many your dealer can get.

While I will likely keep my Walther PPS M2 as my daily carry gun, I am very interested in this gun. Having additional rounds on tap is certainly a good thing. The ability to use larger magazines in the PPQ SubCompact is also very interesting to me.

I look forward to trying one of these out in the near future.

Special thanks to Paul Carlson of the Safety Solutions Academy. Carlson is a top notch defensive firearms instructor and an honorable man. If you ever have a chance to shoot with Carlson, jump at the opportunity. You won’t regret it.

While I haven’t yet had a chance to shoot this pistol, Carlson did and was able to provide these photos. Later today, he will have a video that I will post here.

ATN Thor 4 Thermal Scopes: Better Performance, More Features

by: Richard Johnson 3 Comments

ATN Thor 4 color image

Page Navigation

  • Sensors
  • Lenses
  • Video
  • Controls
  • Ballistic Calculator
  • Cost, Where to Buy

American Technology Network (ATN) Corp. announced a new line of thermal rifle scopes called the Thor 4. These scopes offer a wide range of options and features that are sure to interest many hunters.

Sensors

At the heart of this scope is the ATN Obsidian IV Dual Core T. This is the technology that makes the rest of the features possible in this scope. In the base scopes, the sensor provides a 384×288 resolution while the optional sensor offers 640×480 resolution.

With the internal lithium ion battery, you can expect at least 18 hours of runtime with the first sensor. The upgraded sensor should still run for at least 16 hours on a single charge according to the data provided by ATN.

With this scope, you have the option of three viewing modes: black hot, white hot and color mode. A variety of electronic reticles are included in the scopes.

ATN Thor 4 Scope

There are additional sensors and measurement devices in the scopes. These include a gyroscope, accelerometer, barometer, compass and range finder. These all feed data to a ballistic calculator.

Lenses

Variable power magnification lenses are part of the Thor 4 system. Like any other scope, you have to select the one that makes the most sense for you.

The 384×288 sensor can be paired with one of four different magnification lenses: 1.25-5x, 2-8x, 4.5-18x and 7-28x. With the 640×480 sensor, you have four different magnification lens choices: 1-10x, 1.5-15x, 2.5-25x and 4-40x. The higher the magnification factor, the higher the final price of the optic.

Video

Video capabilities have been upgraded in the Thor 4 models. These scopes use a dual core processor that has enough computing power to handle both recording high definition video and streaming it over WiFi.

In practice this means that you can record the entire hunt onto a microSD card while your partner can see things on his or her phone or tablet in real time. It also allows you to stream live to social media while recording locally if you wish.

The microSD slot can handle high capacity cards: up to 256 GB of data. To put that into perspective, that is a quarter of a terabyte of data. Video is recorded at a resolution of 1280×960 @ 60 fps with the display showing 1280×720.

Controls

https://www.gunsholstersandgear.com/wp-content/uploads/2018/01/thor4__angar_1-1280.webm

On the Thor 4, ATN opted to use a zoom wheel on the left side of the scope. Instead of pressing buttons to zoom in, you simply rotate this knob to move in or out.

Button style controls are still present on the top of the unit. These controls cover other things you may wish to change such as the reticle type or viewing mode.

WiFi and Bluetooth connectivity allows you to send data to your phone.

Ballistic Calculator

Using the data collected with its sensors and a load profile you select, the optic can do calculations for you for more precise shots. In theory, you range the shot and the computer automatically adjusts the reticle location based on all of the data its collected. All you have to do is pull the trigger.

Ranging the shot is accomplished by keying in on the height of the animal you are stalking. From the top of the animal to the bottom of the animal is enough height that the computer can calculate distance.

If you want a faster, more precise way of ranging, ATN offers an auxiliary ballistic laser, the ABL 1000. This laser integrates with the front of the scope and provides a direct measurement to the target.

ATN ABL 1000 Laser

Cost, Where to Buy

The cost of the new Thor 4 series of thermal scopes varies depending on how you choose to equip it. The base model, a Thor 4 384 1.25-5x has a suggested retail price of $1,999.

Upgrading to the 640×480 sensor and changing the lenses affects the price. Going to the largest sensor and using the 4-40x glass jumps the price to $4,799. While that may seem like a lot to the average shooter like me, I recognize that the technology built into this scope is far beyond anything I could have ever had just a few years ago. ATN deserves to make their money back on all of the research and development that goes into this kind of scope.

For me, I would probably buy the ATN Thor 4 640 1-10x. This would seem to make the most sense for my shooting. It offers the highest resolution with a broad range of magnification for short to medium range targets.

GunsHolstersAndGear.com is a for-profit website. I do not charge readers a dime to access the information I provide.

Some of the links on this page and site are affiliate links to companies like Amazon and Palmetto State Armory. These links take you to the products mentioned in the article. Should you decide to purchase something from one of those companies, I make a small commission.

The links do not change your purchase price. I do not get to see what any individual purchases.

Liberty MkIX: 80% 1911 Frame with Significant Advances

by: Richard Johnson 34 Comments

Liberty MkIX 1911 frame

Page Navigation

  • Sizes & Models
  • Fewer Parts
  • Hand Fit, Lefties
  • Pricing, Where to Buy

If you like to build your own firearms, the Liberty MkIX line of 80% 1911 frames may be of great interest to you.

The new Liberty MkIX pistols from Freedom Concepts Laboratory promise fewer parts, lighter weight and improved fit for a range of shooters. With a range of frame sizes, you will be able to build a 1911-style handgun that meets your needs instead of trying to arrange your life around the gun’s size.

Sizes & Models

Initially, there will be three basic models:

  • MkIX-G – a government sized model with a 5″ slide, short accessory rail, full grip and 8 round magazine
  • MkIX-Gx – an extended model with a 5″ slide, full length accessory rail, full grip and 8 round magazine
  • MkIX-O – an officer sized model with a 4″ slide, short accessory rail, full grip and 8 round magazine

All three models are made of a proprietary blend of glass filled polymer. The frame rails are made of steel for increased durability.

80 percent 1911 frame

I should be careful to note that these are 80% receivers, or frames, and not completed firearms. To be used as a firearm, you must complete a number of machining actions on the part before it can be assembled into a working handgun. Once you complete the required machining operations, you can complete it with 1911 parts.

The machining process will require some simple tools and work on your end. Until the machining is complete, this is (legally speaking) just a hunk of polymer. It can be shipped straight to your home without paying $30 or more to have it transferred through an FFL.

Yes, it is perfectly legal to build your own gun. Homemade firearms are completely lawful under federal law and most states. See my article on the federal requirements about applying a serial number to a homemade firearm for more information.

Fewer Parts

According to Freedom Concepts Laboratory, the new 80% 1911 frames use standard 1911 magazines, slides and internal parts. However, the company says the frames require 40% fewer parts than a standard 1911 pistol.

In addition to the 80% 1911 frames, the company will sell a reusable jig. This will be sold separately since it can be used to complete multiple firearms.

1911 frame jig

Freedom Concepts Laboratory states it will support the frames with a full line of parts kits to make assembling the guns as easy as possible for the home builder. This includes a “one box, one gun” package that includes all of the parts you need.

Hand Fit, Lefties

One of the things that 1911 shooters tend to love about the guns is the way they fit into the hand. However, that doesn’t mean the traditional 1911 grip is ideal for all shooters.

To improve the shooting experience for folks of all hand sizes, the company designed the frame to accept different sizes of backstraps. Interestingly, the patent pending backstrap system also captures the mainspring assembly. I look forward to seeing exactly what the designers did here.

left handed 1911

Left-handed shooters may be interested in the ambidextrous nature of this frame. The frame comes with the parts needed for a right-handed shooter: magazine release button and frame mounted safety on the left side of the gun.

However, the company will also offer an ambidextrous upgrade kit for $75. No modifications to the frame are needed to install the ambi kit.

Pricing, Where to Buy

The pricing of these new 80% frames is interesting. The full suggested retail price is $139. This puts them in the same ballpark as the Polymer80 frames for Glock compatible pistols.

However, to sweeten the deal, Freedom Concept Laboratory will offer full pistol kits that include everything you need to assemble a completed frame into a working 1911. These kits will have a MSRP that starts at only $399.

Liberty MkIX 1911 officers model

One of the complaints I hear regularly about building your own Glock-style pistol is that the cost of all the parts exceeds the price of just buying a new factory Glock. At $399, the Liberty 1911 is a real bargain. Not only do you get to build your own gun, but it comes in a lot cheaper than nearly any 1911-style pistol on the market.

All three of the models are expected to ship in March 2018.

According to Freedom Concept Laboratory, the Liberty MkIX pistol frames will be sold through Brownells and the Glockstore. I’m a fan of both companies, and would not hesitate to do business with either in the future. If you like doing business with Brownells, please use my affiliate link here so that I receive a small portion of the profit from that sale. It doesn’t affect your price and it literally helps me feed my family. I do not have an affiliate relationship with Glockstore, but I recommend them regardless. You can access them through this link.

 

  • « Go to Previous Page
  • Go to page 1
  • Interim pages omitted …
  • Go to page 5
  • Go to page 6
  • Go to page 7
  • Go to page 8
  • Go to page 9
  • Interim pages omitted …
  • Go to page 125
  • Go to Next Page »

Primary Sidebar

Join or Die Flag NRA

NRA Life Membership – Best Deal [Limited Time]

Gun owners need to sign up immediately for a lifetime membership to the NRA. Why? Let me tell you. As of January 7, the anti-gun team of Joe Biden and Kamala Harris have officially won the White House. The US Congress is also in anti-gun hands. The bottom line: more gun control legislation is coming […]

Most Read Articles

  • What is the best optic for my Glock 43x MOS
    What is the best optic for my Glock 43x MOS
  • Springfield Hellcat Apex Trigger Review: An Upgrade Worth Considering
    Springfield Hellcat Apex Trigger Review: An Upgrade Worth Considering
  • What Optics Will Fit the Springfield Armory Hellcat?
    What Optics Will Fit the Springfield Armory Hellcat?
  • Wilson Combat WCP320 Carry Review
    Wilson Combat WCP320 Carry Review
  • Girsan MC1911 CT Review
    Girsan MC1911 CT Review
  • Springfield Armory XD 9mm Subcompact Pistol Review
    Springfield Armory XD 9mm Subcompact Pistol Review
  • Cheap Riot Guns
    Cheap Riot Guns
  • Wowtac A1S Flashlight Review - The Budget Torch that Couldn't
    Wowtac A1S Flashlight Review - The Budget Torch that Couldn't
  • Fenix LD15R Review - Handy Flashlight for Utility Use
    Fenix LD15R Review - Handy Flashlight for Utility Use
  • Wowtac A4 V2 Review - Bright Light at a Price
    Wowtac A4 V2 Review - Bright Light at a Price
Installation of Apex Trigger

Springfield Hellcat Apex Trigger Review: An Upgrade Worth Considering

Got a Springfield Hellcat you want to squeeze every bit of performance possible out of? I recommend taking a look at the Action Enhancement Trigger from Apex Tactical Specialties. This user-installable kit promises to retain all of the safety of the stock trigger while improving the break, pull and reset. In this Apex trigger review, […]

Springfield Armory Red Dot Optics

What Optics Will Fit the Springfield Armory Hellcat?

So, you recently purchased a Springfield Armory Hellcat and now you want to add a red dot sight (RDS). The question is “what optics are compatible for a Springfield Hellcat OSP?” Don’t worry – I’ve got you covered.

Best Price on the Wilson Combat WCP320

Wilson Combat WCP320 Carry Review

The Wilson Combat WCP320 Carry is one of the best 9mm pistols I’ve reviewed. From its announcement as the new standard sidearm for the United States military, the popularity of the SIG SAUER P320 pistol seemingly exploded. Original SIG pistols are in high demand and aftermarket accessories are plentiful. You can even build your own […]

profile shot of the Girsan 1911 pistol

Girsan MC1911 CT Review

In today’s review of the Girsan MC1911 CT, I take a look at a classically designed .45 ACP pistol with modern updates including a red dot sight. What might draw a lot of people in is the low price tag: only $661 at full retail. With the standard features, the gun seems like a great […]

Testing the SA XD SC

Springfield Armory XD 9mm Subcompact Pistol Review

While single-stack 9mm pistols seem to be all the rage in modern concealed carry, subcompact pistols that hold a bit more ammunition shouldn’t be dismissed by anyone interested in personal protection. In this Springfield Armory XD Subcompact pistol review, I take a look at the smallest gun in the company’s Defend Your Legacy Series of […]

Atlanta Police Red Dog Deployed to Protest

Cheap Riot Guns

Riots are raging across the United States – and have been for days. Consequently, I’ve had a number of emails come in from readers who are looking for the best self-defense pistol on a budget. Let’s not forget that the government lockdowns from the health crisis have left many people in a tough financial situation. […]

Copyright © 2021 GunsHolstersAndGear.com
GunsHolstersAndGear.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com